Products
Based on over 5000 reviews
Description:The MC-TAIH52 is a high-level analog output module designed to convert digital control commands from a Distributed Control System (DCS) into stable and accurate analog signals..
Product condition: New
Packing condition:Factory Packing
100% insured shipping: A guarantee for your purchases
PLC Autocontroller DELIVER PARTS TO WORLD.
Manufacturer | HONEYWELL |
Item number | MC-TAIH52 51304337-250 |
Country of Origin | United States |
Lead Time | In stock |
After-Sales Support | 12-months |
HS Code / Commodity code | 8537101190 |
Quotes are valid for 30 days from the day the quote is received unless stated otherwise at the time of quotation.
Yes,we offer one year warranty for all new products.
Yes. We worked with FEDEX/DHL/TNT/UPS/ allowing us to provide swift global delivery of parts to any corner of the world.
Normally 3-5 working days,some remote areas 5-7 days more.
– How one “wiring board” saves you a full day of labor
PLC Autocontroller – 20 years on-the-shelf experience · Sales Manager May
One-line benefit |
Data |
Channel density |
16 fully isolated AIs, only 22.5 mm on DIN rail |
Redundancy |
Dual-cable inlet, no jumpers, 30 s change-over |
Hazardous area |
Class I Div 2 / Zone 2, -20 °C to +60 °C, mount on site |
Accuracy |
±0.075 %, 14 effective bits, 4× better than 12-bit cards |
Transmitter power |
30 mA per ch, 23 V min, eliminates extra supply & fuses |
Pain |
Traditional way |
MC-TAIH52 answer |
Surge kills board |
External surge device |
Built-in IEEE C37.90.1 4 kV path, passes test naked |
Ground loops |
Single-ended, noisy |
3-way isolation: ch-ch, ch-system, field-system |
Redundancy = shutdown |
Re-term, re-check wires |
Dual-cage clamps, hot-swap, zero downtime |
Crowded panel |
8-ch FTA + barriers |
One 16-ch slice, same width as one barrier |
Requirement |
MC-TAIH52 |
Common 8-ch FTA |
4-20 mA / 1-5 V universal |
√ |
Order different model |
Built-in 250 Ω precision |
√ |
External |
Open/short wire diag |
√ |
× |
Redundant IOP ready |
√ |
× |
Direct Zone 2 mount |
√ |
Needs Ex e box |
1. Clip to grounded DIN rail—FTA auto-bonds to PE.
2. Run redundant cables in separate trays to avoid common-mode surge.
3. Swap 4-20 mA ↔ 1-5 V per channel: pull plug, move solder bridge—no new part needed.
What happens next?
Leave A Message
Scan to Wechat :
Scan to WhatsApp :