Woodward 9905-969 Analog Input Module

HONEYWELL / 5701 GAS CHANNEL SIGNAL DRIVE 4-20 mA INPUT 5701 SENSOR INTERFACE / CURRENT LOOP 05701-A-0283   Honeywell 05701-A-0283 is the System 57 5701 plug-in drive that powers and conditions a 4-20 mA gas-detector channel. MATCH BEFORE ORDERING Confirm the 5701 host card, current-sink or current-source wiring, transmitter power arrangement, field interface and channel configuration before replacement. SIGNAL TYPE 4-20 mA sensor input LOOP SUPPLY 20 V regulated HOST ASSEMBLY 5701 single channel    Brand New Original One Year Warranty Rapid response INQUIRE NOW

HONEYWELL / 5701 CATALYTIC BRIDGE CONDITIONING CONSTANT-CURRENT DRIVE 5701 SENSOR INTERFACE / CATALYTIC INPUT 05701-A-0284   Honeywell 05701-A-0284 is the System 57 5701 plug-in drive that excites a catalytic sensor bridge and conditions its gas signal. MATCH BEFORE ORDERING Confirm the 5701 host card, detector bridge-current range, cable resistance, sensor sensitivity, field interface and saved channel calibration before replacement. DRIVE METHOD Constant current FULL-SCALE SIGNAL 15 to 600 mV DRIVE LIMIT 10 V maximum    Brand New Original One Year Warranty Rapid response INQUIRE NOW

HONEYWELL · SERIES C I/O · LLMUX Honeywell CC-TAIM01 is the non-redundant low-level multiplexer IOTA used with CC-PAIM01 for thermocouple and RTD inputs through supported remote FTAs. Confirm FTA models, channel count, sensor wiring and cold-junction compensation before replacement. CATALOG NUMBERCC-TAIM01 IOTA FUNCTIONLLMUX MATCHED IOMCC-PAIM01 INPUT SCALEUp to 64 inputs Order check: match CC-TAIM01 with CC-PAIM01; verify every FTA, thermocouple or RTD type, channel count and remote CJC path.◆ One Year Warranty   ◆ Fast Delivery   ◆ Worldwide Shipping

HONEYWELL · SERIES C I/O · HART OUTPUT Honeywell CC-PAOH01 is a 16-channel 4 to 20 mA analog output module with HART support. Confirm the Series C IOTA, 22 to 28 VDC loop supply, field loads, diagnostics and channel configuration before replacement. CATALOG NUMBERCC-PAOH01 CHANNEL COUNT16 channels OUTPUT SIGNAL4 to 20 mA / HART LOAD BASIS800 ohms Order check: match CC-PAOH01 with the installed analog-output IOTA; verify supply, loads, HART devices, revision and fail-safe behavior.◆ One Year Warranty   ◆ Fast Delivery   ◆ Worldwide Shipping

INFINEON · ECONOBRIDGE POWER MODULE PROFILE / 104N16ACTIVE & PREFERRED RECTIFIER + BRAKE CHOPPER DDB6U104N16RR Infineon DDB6U104N16RR is an EconoBRIDGE power module combining a diode bridge, brake chopper and NTC in a compact isolated-base package. 1600 V CLASS104 A RMS550 A SURGE POWER NOTEThermal interface and chopper design must match the converter AC INPUTDIODE BRIDGEDC LINK VERIFY BEFORE ORDERConfirm OPN, package, thermal design and chopper circuit Brand New OriginalOne Year WarrantyFast DeliveryINQUIRE NOW

Honeywell / Experion PKS / Series C CC-TCNT01 C300 Controller IOTA The Honeywell CC-TCNT01 is the Input Output Termination Assembly used as the mounting and termination base in a Series C C300 controller installation. For a replacement order, match the controller model, Experion release, redundancy arrangement, IOLINK/network cabling and memory-backup hardware before shipment. Part NumberCC-TCNT01 ComponentController IOTA PlatformExperion PKS Form FactorSeries C Supply StatusConfirm by RFQ Lead Time2-3 DAYS Order check: send clear photos of both the IOTA and controller labels, plus the required quantity and destination. ✓ One Year Warranty ⚡ Fast Delivery ◎ Worldwide Shipping

Honeywell / Experion PKS / C300 CC-PCNT02 C300 Controller The Honeywell CC-PCNT02 is an Experion PKS C300 controller used to execute control strategies in Honeywell's deterministic Control Execution Environment. CC-PCNT02 enters Legacy Support by 2026 Q2. Confirm the Experion release, IOTA, redundancy arrangement and migration method before ordering a spare or planning a CC-PCNT05 upgrade. Part NumberCC-PCNT02 ComponentC300 Controller PlatformExperion PKS LifecycleLegacy Support Migration PathCC-PCNT05 Lead Time2-3 DAYS Order check: send the controller and IOTA label photos, Experion release, redundancy details, quantity and destination. ✓ One Year Warranty ⚡ Fast Delivery ◎ Worldwide Shipping

SIEMENS · SITOP POWER24 V DC · 40 A MODULAR POWER SUPPLY 6EP1437-3BA00 Siemens 6EP1437-3BA00 is a SITOP modular regulated supply converting 3-phase 400–500 V AC to 24 V DC at 40 A for automation systems. 960 W3-PHASE Brand New OriginalOne Year WarrantyFast Delivery DC POWERRegulated 24 V supply for automation loads 400–500V AC40 A90% EFF. ORDER CHECK3-phase 400–500 V AC input REQUEST A QUOTEInquire Nowab@mooreplc.com  ↗