- Tel: +8618106909650
- Email: ab@mooreplc.com
Products
Based on over 5000 reviews
Description:ABB NGDR-07C is a trigger board designed for precise switching and control in drive systems.
Product condition: New
Packing condition:Factory Packing
100% insured shipping: A guarantee for your purchases
PLC Autocontroller DELIVER PARTS TO WORLD.
| Manufacturer | ABB |
| Item number | NGDR-07C |
| Country of Origin | Switzerland |
| Lead Time | In stock |
| After-Sales Support | 12-months |
| HS Code / Commodity code | 8537101190 |
Quotes are valid for 30 days from the day the quote is received unless stated otherwise at the time of quotation.
Yes,we offer one year warranty for all new products.
Yes. We worked with FEDEX/DHL/TNT/UPS/ allowing us to provide swift global delivery of parts to any corner of the world.
Normally 3-5 working days,some remote areas 5-7 days more.
ABB NGDR-07C
Ultra-Compact 24 VDC Digital I/O Relay Module
(Stock-ready at PLC Autocontroller – 20 years of automation speed)
1.30-second snapshot
• 16 configurable inputs or outputs, 24 VDC, 2 A per channel
• 0.1 ms scan, -25…+70 °C, IP20, 35 mm DIN clip
• Plug-in cage-clamp terminals, no tools, swap in <10 s
• CE, UL, cUL, RCM; GSDML file drops straight into TIA Portal, Studio 5000, Automation Builder
2.Why engineers pick NGDR-07C
Space: 22.5 mm wide = 8 modules per meter.
Speed: 0.1 ms delay keeps cycle times under 1 ms on ABB AC500-eCo.
Safety: each channel has electronic fuse + diagnostics LED; fault bit pushed to CPU in <200 µs.
Energy: 1.5 W own consumption, 30 % less heat than legacy 07B.
3.Ordering & logistics
PLC Autocontroller Hongkong keeps >50 pcs on shelf.
Ship today on DHL/UPS before 16:00 CST, 3-5 days worldwide.
OEM box pricing breaks at 10, 50, 100 pcs – ask below.
Table 1 – NGDR-07C quick-spec
|
Parameter |
Value |
Note / test condition |
|
Supply voltage |
19.2…28.8 VDC |
SELV, ripple <5 % |
|
Current / ch |
2 A resistive |
derate 40 % for DC-13 |
|
Switching freq. |
500 Hz max |
resistive load |
|
Isolation |
500 VAC ch-to-bus |
reinforced, 1 min |
|
Cable size |
0.2…1.5 mm² (AWG 24-16) |
ferrule recommended |
|
MTBF |
380 kh @ 40 °C |
SN 29500, GB |
Table 2 – Space & energy win vs. NGDR-07B (legacy)
|
Metric |
NGDR-07C |
NGDR-07B |
Saving |
|
Width |
22.5 mm |
45 mm |
50 % |
|
Power loss |
1.5 W |
2.2 W |
0.7 W / pc |
|
Rack slots / 64 IO |
4 |
8 |
1 rail saved |
4.Fit-and-forget tips
• Use ABB TK 501 termination kit for 50 % faster wiring.
• Enable “short-circuit latch-off” in Automation Builder → I/O settings; module auto-resets after 1 s.
• For 60 °C cabinets keep 20 mm side-gap; no derating needed up to 70 °C.
5.Download & support
Datasheet, STEP file, GSDML, Eplan macro: bit.ly/NGDR07C-docs
24 h technical hot-line: ab@mooreplc.com (May, English/Chinese)
Need 1 pc for lab or 500 for a line revamp?
Send PO before 16:00 CST, we’ll ship fast.
What happens next?
HONEYWELL / 5701 GAS CHANNEL SIGNAL DRIVE 4-20 mA INPUT 5701 SENSOR INTERFACE / CURRENT LOOP 05701-A-0283 Honeywell 05701-A-0283 is the System 57 5701 plug-in drive that powers and conditions a 4-20 mA gas-detector channel. MATCH BEFORE ORDERING Confirm the 5701 host card, current-sink or current-source wiring, transmitter power arrangement, field interface and channel configuration before replacement. SIGNAL TYPE 4-20 mA sensor input LOOP SUPPLY 20 V regulated HOST ASSEMBLY 5701 single channel Brand New Original One Year Warranty Rapid response INQUIRE NOW
Details
HONEYWELL / 5701 CATALYTIC BRIDGE CONDITIONING CONSTANT-CURRENT DRIVE 5701 SENSOR INTERFACE / CATALYTIC INPUT 05701-A-0284 Honeywell 05701-A-0284 is the System 57 5701 plug-in drive that excites a catalytic sensor bridge and conditions its gas signal. MATCH BEFORE ORDERING Confirm the 5701 host card, detector bridge-current range, cable resistance, sensor sensitivity, field interface and saved channel calibration before replacement. DRIVE METHOD Constant current FULL-SCALE SIGNAL 15 to 600 mV DRIVE LIMIT 10 V maximum Brand New Original One Year Warranty Rapid response INQUIRE NOW
Details
HONEYWELL · SERIES C I/O · LLMUX Honeywell CC-TAIM01 is the non-redundant low-level multiplexer IOTA used with CC-PAIM01 for thermocouple and RTD inputs through supported remote FTAs. Confirm FTA models, channel count, sensor wiring and cold-junction compensation before replacement. CATALOG NUMBERCC-TAIM01 IOTA FUNCTIONLLMUX MATCHED IOMCC-PAIM01 INPUT SCALEUp to 64 inputs Order check: match CC-TAIM01 with CC-PAIM01; verify every FTA, thermocouple or RTD type, channel count and remote CJC path.◆ One Year Warranty ◆ Fast Delivery ◆ Worldwide Shipping
Details
HONEYWELL · SERIES C I/O · HART OUTPUT Honeywell CC-PAOH01 is a 16-channel 4 to 20 mA analog output module with HART support. Confirm the Series C IOTA, 22 to 28 VDC loop supply, field loads, diagnostics and channel configuration before replacement. CATALOG NUMBERCC-PAOH01 CHANNEL COUNT16 channels OUTPUT SIGNAL4 to 20 mA / HART LOAD BASIS800 ohms Order check: match CC-PAOH01 with the installed analog-output IOTA; verify supply, loads, HART devices, revision and fail-safe behavior.◆ One Year Warranty ◆ Fast Delivery ◆ Worldwide Shipping
Details
Honeywell / Experion PKS / Series C CC-TCNT01 C300 Controller IOTA The Honeywell CC-TCNT01 is the Input Output Termination Assembly used as the mounting and termination base in a Series C C300 controller installation. For a replacement order, match the controller model, Experion release, redundancy arrangement, IOLINK/network cabling and memory-backup hardware before shipment. Part NumberCC-TCNT01 ComponentController IOTA PlatformExperion PKS Form FactorSeries C Supply StatusConfirm by RFQ Lead Time2-3 DAYS Order check: send clear photos of both the IOTA and controller labels, plus the required quantity and destination. ✓ One Year Warranty ⚡ Fast Delivery ◎ Worldwide Shipping
Details
Honeywell / Experion PKS / C300 CC-PCNT02 C300 Controller The Honeywell CC-PCNT02 is an Experion PKS C300 controller used to execute control strategies in Honeywell's deterministic Control Execution Environment. CC-PCNT02 enters Legacy Support by 2026 Q2. Confirm the Experion release, IOTA, redundancy arrangement and migration method before ordering a spare or planning a CC-PCNT05 upgrade. Part NumberCC-PCNT02 ComponentC300 Controller PlatformExperion PKS LifecycleLegacy Support Migration PathCC-PCNT05 Lead Time2-3 DAYS Order check: send the controller and IOTA label photos, Experion release, redundancy details, quantity and destination. ✓ One Year Warranty ⚡ Fast Delivery ◎ Worldwide Shipping
Details
SCHNEIDER ELECTRICALTIVAR 71 ATV71HD11M3X VARIABLE SPEED DRIVE ATV71HD11M3X Schneider Electric ATV71HD11M3X is an Altivar 71 drive for 11 kW / 15 HP three-phase motors, supplied without an EMC filter and with a graphic terminal. 11 kW15 HP3-PHASE DRIVE STAGEGraphic-terminal drive SUPPLY200–240 V FILTER3-PHASE ORDER CHECKAltivar 71 motor control Brand New OriginalOne Year WarrantyFast DeliveryInquire Now
Details
ALLEN-BRADLEY · POWERFLEX 70END OF LIFE HIGH-POWER AC DRIVE 20AC022A0AYNANC0 PowerFlex 70 AC Drive 400 VAC three-phase PowerFlex 70 drive rated 22 A with 11 kW normal-duty output, enhanced control and IP20 panel mounting. 400 VAC · 22 A11 kW NDIP20 / TYPE 1 REQUEST A QUOTEInquire NowShare the motor data, mains, cabinet constraints, quantity and destination for a focused review.ab@mooreplc.com ↗ Brand New Original One Year Warranty Fast Delivery
Details
We're available by phone
+8618106909650
ab@mooreplc.com
Leave A Message
Scan to Wechat :
Scan to WhatsApp :
